Your Search: "cross country"

Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm

The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions. - Ideal for MTB, Road, Cyclocross and Commuting - Suitable for use in all weather conditions - Added protection against contaminants - Provides smooth and quiet gear shifting - Reduces friction and improves efficiency - Derived from renewable sources - Can be applied to chain, cables, shifters, derailleurs, pedals & cleats - Pipette system for easy application - Readily Biodegradable* - Integral UV tracer dye - aids accurate application to ensure total protection. *Only contents are readily biodegradable.

The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Hydrodynamic Chain Lube is the ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further. - Ideal for Road Cycling and Cyclocross - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Petroleum free formula for eco protection - Synthetic polymers for long distance performance - Incredible durability - Pipette system for easy application

Because you love your bicycles, and you care about the visual cues of your living space, you need an elegant, non-permanent and stable bike display and storage solution. The Velo Column is a high-quality, floor-to-ceiling bike storage idea. Soft rubber cradles protect your bike’s finish and ceiling, making the Velo Column a versatile bike storage solution for expensive road, cyclocross, and mountain bikes. These cradle arms expand your existing 2-bike setup to 3 bikes (or 4 with purchase of two pair).

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

The Country Jr. is an affordable tire that has a smooth-rolling center ridge and aggressive shoulder lugs for secure traction on loose surfaces. - Long-wearing smooth center ridge rolls fast on pavement, while shoulder lugs provide traction in loose conditions

MICHELIN's Country Junior is a great, multi-surface tire for your kid's 16-, 20- or 24-inch wheel bike. It boasts MICHELIN's long-wearing reinforced carbon black tread that offers nice traction and resists skidding, too.

The Kenda Kross Cyclo Hybrid Tire works excellent in rocky/loose terrain and equally well on pavement. A great cyclocross tire for commuting and riding the local trails. - Please note, these tires are gumwall sidewall but the shading varies

The Kenda Kross Cyclo Hybrid Tire works excellent in rocky/loose terrain and equally well on pavement. A great cyclocross tire for commuting and riding the local trails. - Please note, these tires are gumwall sidewall but the shading varies

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series? FEATURES - Hook & Loop Velcro Straps - Steel Rivets - Replaceable Number Pallet SPECIFICATIONS - Size: Small // Large - Dimensions: 6.5 x 9 inches (Small) // 8.25 x 9.5 inches (Large) - Weight: 84 g / 2.96 oz (Small) // 95 g / 3.35 oz

Your kids will hang with the big dogs on this cross country tire. The XR1 Comp Kids' Mountain Tire has a tread identical to that of its fully-grown adult version, perfect for multi-purpose riding on trails or pavement. - Excels in hardpack and loamy conditions - Ramp center knobs for fast rolling - Fast-rolling and predictable cornering - 60 TPI - Maximum pressure: 50psi - ETRTO: 56-622 - Weight: 890g - Wire bead

Your kids will hang with the big dogs on this cross country tire. The XR1 Comp Kids' Mountain Tire has a tread identical to that of its fully-grown adult version, perfect for multi-purpose riding on trails or pavement. - Excels in hardpack and loamy conditions - Ramp center knobs for fast rolling - Fast-rolling and predictable cornering - 60 TPI - Maximum pressure: 50psi - Wire bead - Weight: 485g

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.

The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled "fish scale" design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance. - Center scales are ramped, providing a fast rolling leading edge, yet sharp effective braking and cornering edges - Exclusive 3C compound construction featuring Graphene compound technology - File-tread Gravel and Cyclocross race tire, designed for a range of conditions

Whether in gravel or cyclocross, one thing is for certain—course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all-conditions tread. At the heart of the design is a fast-rolling center ridge, designed to minimize rolling resistance while still providing confident braking traction. Cornering and off-camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces while still offering a solid effective edge for grass and loam terrain. If you are looking for that one tire to do it all, Terreno Mix is your choice! - Open shoulder lugs for secure off-camber traction - Traditional tread profile for smooth transitions across a broad range of terrain

The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

These pucks attach the Old Man Mountain rack frame to the front or rear of your road, gravel, or cross bike. They provide a secure upper attachment point for the rack. Included in the packet are heavy-duty zip ties, clear protective film, and mounting hardware. Designed for use with carbon, steel, titanium, and aluminum bikes and forks. Slots in the puck also allow for use with metal hose clamps (not intended for carbon bikes). Pucks can be left on the bike for future reinstallation of the rack. Recommended for use only with specific Panduit brand 120 lbs zip ties. Panduit #BT2LH-TL0. - One size fits all road, gravel, or cross bikes. - For use on either rear seatstay or front fork - Made from a carbon resin composite for lightweight strength - Includes heavy-duty zip ties with stainless steel tangs (extra zip ties included) - Includes clear protective film - Hardware included

Three of our most-loved clean, protect and lube products that’ll make light work of grime and keep your bike running smooth. An epic kit that makes for the perfect gift for that bike fanatic in your life. Nano Tech Bike Cleaner - Safe on all parts and surfaces including carbon fibre - Will not harm seals, cables, brake pads or rotors - Safe on anodised metal - Alkaline based and free from CFCs, solvents or acids - Nano Tech Formula cleans on a molecular level MO-94 - Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal to metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency Dry Weather Lube - Ensures silky smooth gear shifts - Reduces friction and energy consumption - Repels water for chain and component protection - Excels in dry, dusty riding conditions - Extreme pressure additives for increased efficiency - Vegetable oil based formula for eco protection - Biodegradable - Pipette system for easy application - Can be applied to chain, shifters, cables and derailleurs - Ideal for MTB, Road and Cyclocross

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

Conquer the local cross scene with Ritchey's SpeedMax Cross. Its diamond-pattern center delivers low rolling resistance with enough bite to ensure excellent traction, too. And, the Comp is great at shedding mud to keep you riding strong in even the nastiest conditions.

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details