Filter By:
Cables

$0.05 - $0.20
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$11.99 - $13.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.

$54.99
The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance.
To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability.
- The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris
- Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction
- Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing
- 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components
What's Included:
- 1x 3200mm XEX Shift Housing
- 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables
- 2x 2225mm Slick-Lube Liners
- 2x LEX-SL 4mm Shift Housing Segments, 300mm
- 4x Open Brass End Caps
- 7x Open Alloy End Caps for 5mm Housing
- 2x Open Alloy End Caps for 4mm Housing
- 2x Pro Indexed Inline Adjusters (4mm/5mm)
- 2x Housing Connectors (4mm/5mm)
- 2x Cable Tips
- 2x Grub Seals
- 2x 5G Tube Tops
- 2x Rotating Hooks

$15.99 - $16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

$5.99 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

$7.00
Rejuvenate the performance of your drivetrain with this convenient and valuable cable.
- Rejuvenate the performance of your drivetrain with this convenient and valuable cable.
- Extra-long 3100mm length ensures fitment for any application
- Compatible with Shimano and SRAM drivetrains
- Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
- Diameter: 1.1mm

$22.00
Upgrade the performance of your drivetrain with this incredibly smooth and reliable cable.
- Upgrade the performance of your drivetrain with this smooth and reliable cable
- Extra-long 3100mm length ensures fitment for any application
- Compatible with Shimano and SRAM drivetrains
- Low-friction cable is rust-proof, comes pre-stretched, and includes cable end cap

$25.00
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs

$25.00
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs

$9.98
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

$42.50
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs

$130.00
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product

$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$10.00
Shimano Stainless Derailleur Cables
Cable Head: Shimano/SRAM
Cable Type: Stainless
Defined Color: Gray
Diameter: 1.2mm
Double Ended: No
Length: 3000 mm
Quantity Included: 1

$89.90 - $99.90
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

$22.00
- Complete ferrule and cable end kit
- Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4)
- Material: Aluminum

$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm

$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
Page 1 of 6
Next page