Parts

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

• Alloy cable ends • 1.2mm to 1.6mm

Replacement reservoir cap screw for Hope brakes.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Aheadset preload adjusting bolt

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

• Designed to keep dust and dirt out of V-Brake cable/housing systems

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Aluminum straddle cable carrier for cantilever brake

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Brass compression olive for Hope hydraulic disc brakes.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Bar end plugs (2)

Product details - Use in chainstay pocket to seal sensor into frame

A must-have item for all your delicate department store bike repairs.

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

BB30 Spacer - 15.46mm