Accessories

- Length 130 cm - Diameter shackles 5.5 mm - Diameter plug in pin 10 mm - Used in combination with safety frame lock AXA Imenso or Block XXL - With one operation your bike is locked with 2 locks - 760 grams

- Hardened steel bracket and lock housing - Anti drilling plate in cylinder - Flexible fixing set also for odd sized frames - Online key service - Maximum security with plug in option - 720 grams

- Defender ring lock with E-bike battery lock - The ring lock has maximum security with plug in option - Hardened steel bracket and lock housing - Anti drilling plate in cylinder - Online key service - 720 grams/181 grams

- Fold folding lock with E-bike battery lock - Length 85 cm - Soft sides prevent scratching - Fits all frames - Cylinder protected agains dust and dirt - Online key service - 953 grams/181 grams

- Aheadset preload adjusting bolt

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...

- Steel - Intended for use with double-strap toe straps (sold separately) - Classic road toe clip profile - Includes mounting hardware - 36 grams per pair

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

Record scratch… this here's our Turntable Sling Bag! Sharp and versatile, it's designed to prioritize and organize everyday items like wallets, phones, keys, or shades. Wear it comfortably as a sling bag or across your lower back, or adjust the straps and stick it on your handlebars for easy rides to work or happy hour. Its exterior bungee compartment is perfect for an extra layer when you think you might stay out late, and extensive product testing confirms up to three cans of LaCroix fit inside. Whether for work or play, with the Turntable Bag you won't miss a beat. - Main body material is 100% post consumer recycled ripstop polyester - Main body fabric, lining, and hardware are all bluesign approved, ensuring sustainability and the lowest possible impact on people and the environment - Two compartments and a slip pocket inside - Padded back panel adds structure and comfortable accommodations for your U-Lock - Dimensions: 25cm x 12cm x 16cm; 1.75L volume

Featuring a custom fork crown and elegantly curved blades inspired by classic randonneuring forks, the All-City Space Horse Fork comes outfitted with four-pack rack mounts to accept a variety of front rack styles. Signature fork ends accommodate 12mm thru-axles and flat-mount brakes, E.D. coating offers protection from rust, and a liquid black paint finish adds shine to its timeless silhouette. - 100% 4130 Chromoly tapered blades and matching signature fork ends - Custom-designed lugged fork crown, four-point rack mounts, stealth dynamo routing - 700c x 45mm maximum tire clearance; 41mm with fenders Specifications: - Brake Mount (Fork): Flat Mount 160 - Wheel Size: 700c - Brake Type: Disc - Crown Race: 30.0 - Steerer Type: Straight - Offset: 52 - Material: Steel - Steerer Tube Length (mm): 350 - Maximum Tire Clearance (Fork): 700c x 45mm or 650B x 47mm - Front Axle: 12mm Thru x 100mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Front Hub Spacing (mm): 100 - Axle to Crown Length: 395

Bar Tape Clips are simple little plastic replacements to the dreaded electrical tape that's often used to finish off wrapped bars. These clips work with one or two internal cables, either on oversized 31.8 bars (where it tapers down to 28.6) or old-school 28.6 bars.

Arundel T-wrench 3,4, 5mm Our Cr-Mo steel T-wrenches are constructed in one-piece, from lost was investment castings. They are tumbled to size before being nickel plated, to reduce rust. Designed to fit within the contents of your seat bag, our T-wrenches are compact, yet big enough to provide a bit of leverage for making adjustments. - Investment cast Cr-Mo steel - Nickel plated to reduce rust - Small enough for a seat bag, but big enough to leverage

The Sport is basically a modified Dave-O shape, made of nylon-reinforced plastic. Sports are as tough as nails and hold bottles well in all conditions and any application. They have two sets of mounting holes to allow the best fit possible. We consider this cage as good as anything we make, it's just made out of different stuff. - Weight: 47 grams

Kryptonite is in the movies Gryptonite is real - Grippy and secure like our top carbon models - Sleek form, durable and reliable function - Weighs in at a modest 48 grams - Wide variety of colors to enhance your ride - Gloss/matte combo finish adds style to any bike Using only 48 grams of the same material as our proven Sport Cage and the geometrically enhanced arm design of our venerable Mandible cage, the Grypto Cage offers outstanding bottle holding security at a more affordable price. Gloss highlights on a satin finish and a wide array of colors offer an aesthetic that will look good on any machine.

The Looney Bin is the place for those that just can't get along with the rest. Not every bottle is 73mm and not everyone wants to use a "regular" bottle while on their bike. The Looney Bin will hold anything from a convenience store bottle of H2O to a nice bottle of Pinot Noir. This is the perfect cage for a commuter rig or the Mixte for that spring picnic. Drink and ride responsibly… - Fits bottles 65-95mm

Keep your tools at hand to avoid the walk of shame. - 11 Bits included - Hex: 2, 5, 3, 4, 5, 6 - Torx: T10, T15, T20, T25, T27, T30 - Quiver holds 3 bits - Magnetic bit receptacle - JIS driver - Threaded barbs for a secure fit in bar tape and allow for a tool-free removal - Fits standard road bars - Tin box included - Weight: 75 grams (Tool bit holder, Quiver, and 3 Bits)

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.