Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "enduro"

$119.00
Enduro Zero Pulley Assemblies use grade 5 ceramic bearings. Races are won and lost by derailleur pulley drag. - VV" type 2-lip non-contact Silicone labyrinth seals - Nylon/graphite retainer
$26.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$18.00
ABI Headset Bearing for new builds or replacements.
$29.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations
$28.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations
$5.00
The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets - Contact face seal seals directly to the bearing OD to make it a more universal fit - Apply a thin film of grease on the back side of the seal for optimum seal performance
$26.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations
$29.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations
$36.00
ABI Headset Bearing for new builds or replacements.
$37.67
ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45
$40.17
ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 136 Stainless 32.75 x 41.75 x 6 mm: 45 x 45
$27.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$33.00
- Installation wrench for all Enduro TorqTite Bottom Brackets - Some TorqTite installations require two wrenches
$31.99
High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing
$197.00
- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets. - The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore. - The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.
$6.70 - $10.30
Grade 10 chromium steel balls
$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$129.99
The MT500 Spray Short is an innovative and hard-wearing hybrid that combines the best bits of a waterproof and stretch MTB short. The MT500 Spray Short is designed to excel in damp, variable conditions. A waterproof, taped seat panel sheds off the worst of the water kicked up from your back wheel, while unrestricted movement and comfort are maintained by using a durable stretch nylon fabric for the rest of the short. These shorts have been designed with knee pads in mind, with the leg length optimized to keep the pad-gap police at bay. While only the seat panel of the short is waterproof, a DWR treatment has been applied throughout to help water bead and not soak into the shorts. As with all of Endura's DWR treated garments, an environmentally friendly PFC-free DWR has been used in line with Endura's commitment to reducing our environmental footprint. - Lightweight durable 4-way stretch front panels with DWR finish - Waterproof 3 layer seam taped rear panels for spray protection - Stretch wicking waistband with Velcro side waist adjusters - Zipped hand pockets - Clickfast liner compatible - Like the mutant offspring of a waterproof and standard baggy short - 90-day Satisfaction Guarantee
$42.50
Ultra-Lightweight Warm-Weather Baselayer - Extra-fine-gauge rapid-wicking mesh fabric for maximum breathability - Super-soft hand touch - Pre-shaped forward-facing short sleeves - Cycle specific paneling with flatlock stitched seams - Temperature recommendation; 15°C +
$39.99
Ultra-Lightweight Warm-Weather Baselayer - Extra-fine-gauge rapid-wicking mesh fabric for maximum breathability - Super-soft hand touch - Cycle-specific panelling with flatlock stitched seams - Temperature recommendation; 15°C +
$9.48
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$7.60
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$14.42
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$7.71
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$5.67
- Grade 10 chromium steel balls
$8.50
- Grade 10 chromium steel balls
$100.00 $179.99 44% Off
On Point Element Protection Design Philosophy The SingleTrack collection is where fashion and function meet in the Endura range, with neither compromised! The latest waterproof jacket boasts fresh colors and a subtle embossed print in a new, contemporary yet timeless panel design. The Exoshell20 fabric continues to offer class-leading performance while the rich feature list ensures the Singletrack jacket delivers for on and off-bike adventures, no matter what the weather >Feature Packed Wet Weather Protection The SingleTrack Jacket's clean looks may be deceptive, but don’t be fooled. This is a thoroughbred riding jacket designed to fulfill all of your on and off-bike needs. The grown-on hood provides weather protection when needed, a chest pocket is included for your valuables, and two front handwarmer pockets for all of your storage needs. Add to this two large zipped pit vents and the addition of a weather-repel main zip for 2021 you have more than one more reason to go ride in the rain. >Exoshell20™ With an extremely soft, noise-free outer face fabric and a superfine denier tricot inner layer sandwiching the thin PU membrane, Exoshell20™ exceeds expectations of comfort and performance. The 10,000mm waterproof rating ensures water doesn't get in and a best-in-class breathability of 20,000g/m2/24hr keeps you dry from the inside. Key Benefits: - Waterproof and breathable ExoShell20 ECO 3-layer fabric - Contains >80% recycled fabric with PFC-free non-toxic durable water-repellent finish - Water-repellent front zip with storm flap - Grown-on hood with front adjustment - Water-repellent zips on the center front and chest pocket - Pits vents for temperature regulation - Reflective trims on hood cuff and rear tail
Page 1 of 6 Next page