Filter By:
Parts & Accessories

$16.49
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.

$29.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s

$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel

$6.50
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

$34.95
- Fixie style straps that are compatible with most flat pedals
- Provide the pulling power of straps with the easy release of clipless pedal system
- Stiff, wide straps do not need toe clips

$199.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
NOTE: This product contains pedal bodies only, spindles and electronics are not included.
In the box:
- Left and right pedal bodies (SHIMANO SPD-SL style)
- Replacement seals
- 55 mm Q-factor washers
- Battery doors

$199.99
- Allows a customer to convert any Rally 100 or 200 product over to RK/RS/XC pedal body styles.

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps

$21.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$22.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g

$65.00
The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw.
- The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each)
- SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578).
- Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585).
- Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).

$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals

$399.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.

$45.00
The soft rubber Activ Grip City pads feature our exclusive LOOK Activ Grip technology developed in partnership with Vibram and are compatible with our Geo City platform pedals. They offer the best foot-to-pedal connection we have ever designed, with exceptional grip, wear resistance and durability.

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees

$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces

$29.99
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)

$18.00
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float

$14.00
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface.
- Compatibility: KEO Grip/KEO Cleat
- Use: Protect the cleat

$10.00
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair

$23.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

$23.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.