Chainrings

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.

An issue many people ran into when they began using 1x setups was chain retention with the front chainring. In the beginning of the 1x movement, many companies dealt with this by using aftermarket chain keepers that somehow bolted to the frame. Many people discovered that using a narrow-wide chainring in conjunction with some type of 'clutch' rear derailleur helped abate or eliminate these chain-jumping issues. Narrow-wide rings use alternating tooth profiles that more positively engage the chain and help control a deflecting chain in bumpy conditions. Your friends at Surly have partnered with SRAM to bring you stainless steel X-Sync chainrings. Stainless Steel is durable. This durability is pretty useful when you're talking about the one ring that is bearing the brunt of all your miles.

The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super strong design. - Bore: 15/16" / 24mm - Thickness: 6.0mm - Adapters for 22mm & 19mm spindles included - Weight: 2.3-ounce

The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super-strong design. - Includes sprocket guard - Material: Aluminum - Chain Width: 1/8" - Bore: 24mm - Weight (oz): 2.3 - Thickness: 6 mm - Tooth Count: 25 teeth - Interface: Bolt Drive

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

64BCD chainring for MTB cranksets

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram compact crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram* standard crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm

Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric

The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

Replace worn-out chainrings or change out gearing with SRAM's Yaw Compatible Inner Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. This chainring works for SRAM's Yaw front derailleurs on both 10- and 11-speed drivetrains. The 42-tooth version works best when paired with a 55- or 54-tooth big ring.

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD