Skip to main content

Filter By:

Indoor Cycling

Tacx FLUX 2 Smart
$899.99
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
Tacx NEO 2 Smart
$1,399.00
Meet The NEO 2 Smart, the pinnacle of indoor bike training. In addition to immersive features that truly make you feel like you’re riding outdoors, this new direct drive also features pedal stroke analysis and a number of other refinements that make it one of the most quiet, realistic and accurate bike trainers available. - Next-to-silent smart bike trainer with improved accuracy within 1%; measures power and cadence - Enables accurate pedal stroke analysis with left and right balance and power distribution - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride feel - Unique motor design allows for a maximum sprint resistance of 2,200 watts and simulates climbs up to a 25% incline - Only bike trainer with road feel, a feature that lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Mains power optional Power indicator: Multicolor LED , Spot on floor Connection indicator: (ANT/BT) 2 LEDs Firmware upgradable: Yes Suitable cassettes: >2018: Shimano & SRAM: 8 - 11 speed; <2018: Various Shimano, SRAM & Campagnolo cassettes. >2018 Campagnolo body sold separately. Suitable axles: Road 130mm, MTB 135mm. Adapters for other widths available Supplied with: Front wheel support, Quick release for road bikes and QR-fork mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) Height: 550 mm (21.7 in) Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2800 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
Tacx NEO 2T Smart
$1,399.99
The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent then ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date. - Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1% - New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence - Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride - Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct-drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Main power optional Power indicator: Multicolor LED, Spot on floor Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750mm (22.6 × 29.5 in) Height: 550mm (21.7 in) Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2875 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
CycleOps SuperMagneto Pro Training Kit
$519.99
CycleOps’ SuperMagneto Pro Training Kit offers smooth road-feel and four magnetic settings for dialing in the exact real-world simulation your workout calls for. The easy setting is ideal for warm ups and easy days, the road mode is tailored for high-volume rides, you can throw down hard with the interval setting and the mountain mode lets you crank out intense hill workouts even when the weather outside is nasty. Each setting has progressive resistance, where just like riding outside, resistance builds the faster the wheel spins. The frame is tough, sturdy and stable so you can ride as hard as you want. Two Climbing Riser Blocks are stackable to simulate steep grades, a RaceDay training DVD keeps you motivated, and a Training Mat and Sweat Guard protect your equipment and floor.
Page 1 of 1