Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

Ritchey WCS 1-Bolt Seatmast Topper
$49.95
Replacement WCS Seat Mast Topper for compatible Ritchey seatposts. - For frames with integrated seat mast, different offset heads for tuning cockpit setup - Seat rail clamps not included, use in conjunction with Ritchey WCS Seat Mast 1-bolt rail clamp set, 7 x 7mm (MPN #55055467006) - SideBinder 1-bolt fore/aft and tilt adjustable - 3D forged alloy body and head with one-bolt pinch clamp - 110g
Ritchey WCS 1-Bolt Seatpost
$89.95
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)
Ritchey WCS Carbon 1-Bolt Seapost
$199.95
The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)
Ritchey WCS Kite Dropper Seatpost
$299.95 - $369.95
When designing the WCS Kite dropper, Tom looked at what makes existing droppers fail and why their lifespan was so short. He knew service was a main contributing factor in dropper's lives, and wanted to create a post that could be easily serviced should something happen. In doing so, he created a system that is deceptively simple and incredibly reliable. The 3-position Kite offers 30mm of initial drop - the optimal height for lowered center of gravity while still providing an efficient pedal stroke - and full drop for when getting low and behind the rear end is necessary. - Three travel stops (0, 30mm, full drop) - Weight: sub 500 grams (including remote & housing) - 31.6 diameter - Stealth cable routing - Compatible with a variety of brake lever and bar mount configurations including Shimano I-SPEC I / II & SRAM Matchmaker - New two-bolt Trail post clamp offers easy adjustment and will not slip - Easily serviceable - Watch service video
Ritchey WCS Link Seatpost
$89.95
Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black
Ritchey WCS Link Seatpost
$89.95
Bike fit is important. A bike should feel like an extension of the body, especially when dialed-in. Getting just the right saddle position is second-to-none when putting out power over long miles. Ritchey Link posts offer two clamp positions for greater adjustability in dialing-in the right fit. - 7050 Alloy 2pc Press Fit Head - 20mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Length: 350mm
Ritchey WCS Trail Zero Post
$74.95
The newly redesigned Trail post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether your hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - 3D Forged 7050 Construction - Fore/aft adjustment bolts for precision adjustment and secure clamping - Zero offset - Length: 400mm - Finish: Blatte - 240g (27.2x400)
Ritchey WCS Trail Zero Seatpost
$74.95
The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - 3D Forged 7050 Construction - Fore/aft adjustment bolts for precision adjustment and secure clamping - Zero offset - Length: 400mm - 240g (27.2x400)
Ritchey WCS Zero Seatpost
$74.95
Whether it's a cross remount, an unexpected pothole, or a rough line down the trail, the WCS Zero post will not relinquish its position. Featuring a confidence-inspiring extra-secure fore/aft bolt system, the Zero post is second-to-none in ease of installation and fit adjustment. - Fore/aft adjustment bolts for precision adjustment and secure clamping - 3D Forged 2014 Alloy - Offset: Zero - Cradle: Standard saddle rail clamp
Race Face Next Seatpost
$129.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Race Face Ride XC Seatpost
$29.99
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
Race Face Turbine Dropper
$379.00
The internally routed post uses a mechanical lock to keep the post in place and a low-pressure air spring to return to post to maximum extension. Due to the lack of oil and static seals; the post operates in below-freezing temperatures making it a good choice for fat bikes and cold weather riding. - Hunter Head two-bolt design fits standard and 7 x 9 mm Carbon Rails - Actuation cable easily (and tool-free) disconnected with Quick Connector for easy post removal. Uses standard shifter cable and housing - Extreme changes in temperature may require a user to follow the tool-free brake reset procedure for optimum function - Adjusting the air pressure will change the return speed of the post. 20-40 psi range - Remote sold separately
Race Face Turbine R Dropper Seatpost
$294.99
The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Built by Fox using the same chassis and internals as the Fox Transfer post - Features faster rebound than Fox Transfer - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Race Face 1x Lever or Universal Lever compatible - Matchmaker compatible - Remote sold separately
Race Face Turbine Seat Post
$79.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
Profile Design 1/TwentyFive Seatpost
$99.99
Profile Design's 1/TwentyFive seatpost is the choice when you need the most aggressive position possible. 25mm setback rails ensure that your fit is totally dialed before your next ride. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
Problem Solvers Seatpost Shims
$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Paul Component Engineering Tall And Handsome Seatpost
$140.00
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
Odyssey Pivotal Seat Post
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey Tripod Post
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Kalloy 602 Seatpost
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
KS LEV-Carbon Seatpost
$589.00
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
KS Zeta Dropper Seatpost
$395.00
KS's Zeta post adds a sleek, seamless appearance to dropper function, making it a excellent choice for drop-bar and cross-country race bikes. The low drop allows for lower center of gravity for high speed descents and more nimble bike handling in technical situations without the bulk of a more trail-oriented dropper post. - Max. Height: 244mm - Min. Height: 136mm - Remote Position: Left or Right - Cable Routing: Internal
FSA Energy SB20 Seatpost
$53.99
The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft. - 3D forged and CNC machined AL6066 w/ alloy head - Directionally butted for low weight and additional strength - Chromoly hardware - Clamp Style: Standard Rails
FSA K-Force Seatpost SB32
$191.99
The K-Force post’s one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There’s also the option of mounting a Shimano Di2 battery in the bottom of the post. - One piece continuous carbon fiber construction - Forged alloy Minimal Top Clamp (MTC) - UD carbon finish - Removable mounting hardware for FSA WE or Di2 battery
FSA Metropolis Seatpost
$62.99
FSA's Metropolis seatpost is CNC machined from AL6069 aluminum and features a forged alloy single-bolt head with chromoly hardware. Simple and elegant, this seatpost gets the job done weighing a scant 257 grams.
Easton EA70
$64.99
The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.
Easton EA90
$99.99
Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy
Easton EC70 - ISA
$149.99
The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon
ENVE Seatpost 300mm
$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)
ENVE Seatpost 400mm
$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)