Other

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

For riders who appreciate an elegant and streamlined setup, the Stem to Top Cap Tapered Spacer features a slight taper toward the top, allowing it to transition seamlessly to the Top Cap. - Anodized aluminum construction, no logos - Sold in packs of ten - 4mm outer diameter at base tapers to 32.5mm outer diameter at the top - S.H.I.S. Stem Clamp Diameter: 28.6

The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.

MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each

These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum

These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum

The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

MisMatch adapters allow users to mount Shimano & SRAM brakes and shifters on one clamp. MisMatch Adapter 1.0/1.1 attaches SRAM shifters to Shimano I-Spec-A or I-Spec-B brake lever clamps. MisMatch adapters and the ever evolving “standards” it attempts to integrate between SRAM and Shimano is a confusing subject. Shimano brake and shifter mounting options have changed a lot, going through four mounting systems from 2011-2016. Shimano components have a model number printed somewhere on the brake and/or shifter, and this is the best way to determine what you own and what adapter you need. MisMatch 1.0/1.1 fits Shimano brake levers:BL-M985, BL-M988, BL-M820, BL-M785, BL-T785, BL-M675, BL-T675, BL-M640, BL-M596, BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506 - Annodized Black