Bottom Brackets

Sealed and Delivered Bottom brackets are something you never think about until you do. With superior sealing and cable routing clearance, our 30mm Cinch BB92 will give you true peace of mind. This bottom bracket stands for precision and and durability. All About The Ball Bearings This BB uses 6806 retainer bearings packed with waterproof grease, along with improved wiper seals to ensure above-and-beyond durability and performance. Death to Creaks We fired up the ol' CNC machine to make sure the anodized alloy cups of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not Features a built-in telescopic sleeve with improved sealing, keeping moisture from bearings and crank spindle. Plus, the sleeve provides more space for internal cable routing.

Spinning and Grinning This rock-solid, durable performer is everything you need in a press-fit 24mm bottom bracket and nothing more. Roll on...and on...and on. In A Sea Of Bearings These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run. Close Enough Won't Cut It These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.

Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket. - 2 lines of bearings on each side

- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

- Spindle Interface Type: 386 EVO - BB Shell Width: 68mm - Bottom Bracket Shell I.D.: 46mm - BB/Frame Interface: T47 - Weight: 95g

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams

ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Surly OD Bottom Brackets - PF cups are 41mm in diameter - Bearing I.D. is 24mm - OD bottom bracket comes with telescoping center sleeve for added durability - High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating - 3 additional 1mm spacers are provided to help with chain line and crank arm clearance

As The Wheel Turns This trusty 30mm workhorse of a bottom bracket is built with custom RF double row cartridge bearings for trouble-free, long haul rolling for you PF41 frame. In A Sea Of Bearings These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run. Close Enough Won't Cut It These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.

Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams

BSA Bottom Bracket

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

Thread together BB for 386EVO frames and 29mm spindle diameter SRAM DUB compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, PF30/83 - Bottom Bracket Shell Width (mm): 83mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 29mm - Over Bearing Width: 86.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 126g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - BB386EVO - BB392EVO - BBRIGHT - PF30 with 83mm wide BB shell (downhill)

Threaded ABEC-3 BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 126g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters

Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 133g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks: - BB386EVO - BB392EVO

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g

By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g

Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

Thread together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.8mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 145g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 22/24mm diameter spindle cranks: - BB386EVO - BB392EVO