Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$5.95
Bar Tape Clips are simple little plastic replacements to the dreaded electrical tape that's often used to finish off wrapped bars. These clips work with one or two internal cables, either on oversized 31.8 bars (where it tapers down to 28.6) or old-school 28.6 bars.
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95 - $74.99
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$8.99
Keep your pant legs clean and clear of the drivetrain while commuting with the Bontrager Town Pant Strap. Strap adjusts to fit with hook and loop closure. It features high quality 3M reflective materials.
$12.99
Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates
$22.99
An adjustable, rear integrated kickstand that supports kids bikes, from 20" to 26" wheels. A leg to stand on for most kid's bikes Intended for kid's bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep your little riders' bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 20" wheels all the way to 26" wheels. Product details - Adjustable length fits bikes with 20-26" wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Doesn't interfere with pedaling - Includes both M5 and M6 mounting hardware
$22.99
An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
$25.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
$29.99
The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.
$7.99
Clear stick on chainstay and frame protectors.
$9.85
The Dimension Metal Leg Band keeps pant legs out of the gears. - Sold as a pair
$9.99
Original equipment replacement head badge. - Designed for 63mm diameter tube - Embossed aluminum construction - Adhesive backing
$9.99
Be a part of the Electra pack. Sticker pack, that is. Slap 'em on your desk. Stick 'em all on your notebooks. Show off your bumper. Put the Electra mark anywhere...or add these to your sticker collection. Share the Electra love. - Set of 15 vinyl stickers - Authentic Electra designs
$9.99
Share the Electra love. Be a part of the Electra pack. Sticker pack, that is. Slap 'em on your desk. Stick 'em all on your notebooks. Show off your bumper. Put the Electra mark anywhere… or add these to your sticker collection. Product details: - Set of 15 vinyl stickers - Authentic Electra designs
$12.99
Give your bike the ol' razzle dazzle The perfect accessory for fun and safety. Chose from three vibrant colors paired with reflective elements. Product details: - Fits the end of a standard grip (handlebar end cap needs to be removed) - Reflective elements for added safety
$12.99
Give your bike the ol' razzle dazzle. The perfect accessory for fun and safety. Chose from three vibrant colors paired with reflective elements. - Fits the end of a standard grip (handlebar end cap needs to be removed) - Reflective elements for added safety
$15.99
Electra's motorcycle-inspired Genuine Leather Streamers add road warrior style to any ride. Simply slip these stylish streamers into the end of your grips and set out on the open road.
$39.99
Carrying your bike has never looked so good. It's okay to take help every once in a while Attach to your seatpost and downtube to easily transport your bike up, down, and all around. As part of our Faux Leather collection, this bike carry handle helps you maneuver throughout the city. Product details - Fits pedal bikes and e-bikes - Includes two regular straps at 165mm long - Includes one long strap at 300mm long - Matching saddle, tool bag, and grips available
$11.99
- For mounting a bottle cage to 22.2mm handlebars - Bottle cage not included
$70.00
Since the invention of the bicycle there’s been one constant…”How much does it weigh?” Whether it’s a wheelset, frameset, tool set, or whatever else riders get fixated on, weight matters. The Alpine Scale was the first Feedback Sports product and it was the first scale of it’s kind to be built (and patented) specifically to be clamped in a bike repair stand. With unmatched consistency and precision, ability to go quickly between pounds decimal, pounds and ounces, grams and kilograms with double the accuracy of our competitors, this is your hang scale of choice. - Easily clamped in a bike repair stand - Measures in precise 10g (0.02lb) increments - Easily swaps between pounds decimal, pounds and ounces, grams and kilograms - 8.5? (21.5cm) top nylon loop allows to hang from a hook, tree branch or by hand - Accuracy within ±10g (0.02lb) - 55lb (25kg) maximum load - Coated hook protects your frame or components - Zero and Tare functions for clearly and accurately identifying weight differences - Auto shut-off saves battery life - (4) AAA batteries included - 1-Year Warranty
$9.99 - $12.50
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $13.50
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Page 1 of 5 Next page