Parts & Accessories
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
Product details - Replacement mounting strap for Bontrager Glo and Ember lights - Silicone strap allows for quick installation and removal of light - Fits 22.2 – 31.8mm handlebars, seatposts, and much more
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya. Features - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight - Compatible with Vya Pro Taillight and standard Vya Taillight
Page 1 of 3 Next page