Filter By:
- Parts & Accessories (60)
- Combos/Systems (43)
- Headlights (61)
- Taillights (51)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Lighting
$17.95
- Compatible with 6-12V E-bike battery
- Integrated reflector
- Water and shock resistant
- Mounting distance 50 mm
- Visible from the side
- 40g
$17.95
- Compatible with 6-12V E-bike battery
- Integrated reflector
- Water and shock resistant
- Mounting distance 80 mm
- Visible from the side
- 40g
$29.95
- High power 35 lux LED light, more than 50,000 hours life span
- Integrated retro reflector to be better seen by oncoming traffic
- Compatible with 6-12V E-bike battery
- Optimal light distribution by our double lens technology
- Clear lens technology, you are also visible from the side
- Compact, sportive design
- 70 gr
$3.50
Product details:
- Replacement or extra mounts for all Bontrager Flare rear lights
- Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot
- Kit includes Flare light mount, two bases, and rubber strap adapters
$4.99
Product details
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage
$5.99 - $6.99
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g
$6.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long
$10.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash
$10.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$11.99
Product details
- Easily integrate your Bontrager Flare tail light on your Madone 9 Series
- Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
$14.93
$25.99
43% Off
A beacon in the night
The Ion 120 front light comes in an easily mountable compact size yet packs enough punch to light the road or trail in front of you. A powerful 120 Lumen front light, Ion 120 illuminates in three modes: high, low, and flash, and offers 270 degrees of visibility. Batteries and Sync mounting brackets included.
- 120 Lumens via high-power, environmentally-friendly, 1W CREE LED
- Be seen with focused optics and over 270 degrees of visibility
- High, low, and flash modes for versatile lighting options
- Sync bracket allows for quick and easy adjustment, mounting, and removal
- Includes 3 AAA batteries and Quick Connect bracket
- Blendr compatible
$15.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
$15.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$21.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash
$22.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote.
The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm.
- CNC alloy design provides light and stable mount
- Allows for infinite angle adjustment
- Compatible with 31.8mm - 22.2mm bars
- For use with Transmitr Wireless Remote
$34.99
$49.99
30% Off
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual
$39.93
$59.99
33% Off
A daytime running light is the easiest and best way to keep riders safe and visible. The Ion 200 RT provides the proven safety of a daytime running light in a compact and powerful USB rechargeable package, and it features a distinctive flash pattern that's visible from up to 2km away.
Product details
- Specifically designed focus, flash, and range for ultimate daytime visibility
- 200 Lumens via high-power CREE LED
- Integrated light sensor auto-adjusts brightness to your environment
- Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and wireless control
- 200LM-1.5hrs, 100LM-3hrs,5LM-14.5hrs, Night Flash-30hrs, Day Flash-12hrs
- Easily attaches to your handlebars, helmet, or bike mount
- Blendr compatible bar mount available
- Includes Ion 200 RT, front Quick Connect bracket, and mini USB charging cable
$40.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights.
Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach!
- Communicates via ANT+ wireless technology
- Compatible with all Bontrager RT front and rear bike lights
- Can be paired with up to four lights simultaneously
- Wirelessly controls light functions, including on/off and mode selection, and signals battery status
- Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately)
- Double-press powers on all lights; single press changes modes
- Flashing LED when powered on indicates low battery in one or more connected lights
- Includes CR1632 battery, handlebar mount, and quick-start manual
- Battery: CR1632 (Coin)
- Weight: 12g
$43.99
Small but powerful
The Ion 100 R is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 500m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable.
- Focused optics provide be seen safety with a broad but powerful light
- Integrated light sensor auto-adjusts brightness in flash mode
- 100 Lumens via high-power CREE LED
- Ideal for handlebar or on bike mount
- 100LM-1.5hrs, 50LM-3hrs,5LM-16hrs, Night Flash-7hrs, Day Flash-5hrs
- Includes quick connect bracket and micro USB charging cable
- Blendr compatible, secure bar mount available
$99.99
$119.99
17% Off
A powerful front bike light with a wide beam that illuminates any road or trail and can be seen from 2km away as a daytime running light.
Ride with confidence, day or night, with the Ion Elite R Front Bike Light. This USB-chargeable light features a powerful beam with a wide pattern perfect for the road, path, or trail. Designed to offer lumens that last, Ion Elite R lets you ride longer with sustained brightness and features five modes including day flash for use as a daytime running light.
- Ion Elite R provides a powerful beam that lights up the full width of any road or trail
- A warm, wide 1000 lumen beam allows confident night riding
- Specifically designed focus, flash, and range flash patterns offer ultimate daytime visibility
- Long-lasting brightness exceeds industry standards
- 1000lm-1.5hrs, 650lm-3hrs, 350lm-6hrs, night flash-26hrs, day flash-22hrs
- Adjustable hard mount attaches securely to handlebars between 25.4-35.0mm
- Blendr compatible with available helmet mount
- Includes an adjustable hard mount and micro USB charging cable
- Battery: 5000Li-Ion
- Weight: 187g
$19.99
This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night.
You’ll Love –
- 5 LED bulbs for higher visibility
- 4 light modes (flashing, constant, chasing, and random)
- Compatible with any Burley trailer that has a Light Loop or Light Bracket
- Includes clip-on light and 2 AA batteries
$27.95
CatEye combo set featuring the EL135 headlight and Orb LD160 tail light
Headlight: EL135: The HL-EL135 with three LEDs and OptiCube lens technology for a wider, 150 candlepower beam is the perfect everyday commuter safety light.
- 3 white LEDs
- AA alkaline battery x 2
- 2 modes
- FlexTight H-34N bracket
Tail light: Orb LD160: The ORB pairs a sleek, compact design housed in an alloy chassis. The lens itself serves as the operating switch and is protected from inadvertent triggers while still allowing for side visibility.
- Simple, compact and lightweight
- Easy switch operation
- Side visibility
- Attaches to seatpost, helmet or bag with the heavy-duty rubber band
- CR2032 battery x 2
- Long runtime
- 3 modes
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$10.95
- Installs under the seat for a low profile, less cluttered appearance
- Easy to install and stays secure in all terrain
- Clamps to most two-rail bicycle saddles
- Use with Cygolite Hypershot and Hotshot tail lights
- Can also be used with GoPro compatible interface
- Premium plastic for strong durability
- Only weighs 23 grams
- Less prone to scratching bikes compared to metal mounts
- Tail light secures to mount without removing from saddle rails
- Designed, engineered, and assembled in the USA
$13.95
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems.
- Includes: helmet bracket, velcro strap, and foam pad.
$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
$15.95
- Fits 25.4 to 35mm handlebars.
- Wide range compatibility designed for standard and larger diameter handlebars.
- Easy to install and stays secure in rough terrain.
- Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak
- Durable and convenient.
- Premium plastic for strong durability.
- Quick release feature makes removing the light quick and easy.
- Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.
$29.95
Packed with more power and technology than meets the eye, the new Dice™ HL 150 fires up the night with an incredible 150 lumens, and stands out in broad daylight with its intense lightning-like flashes. It even senses day and night, automatically switching to the optimal flash mode. Engineered for road cyclists, it uses a low-profile, flexible mount that's designed for most handlebars including aero bars. (Patent Pending)
- Powerful 150 lumen output with 8 light modes
- Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes
(Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash)
- DayLightning® mode emits powerful lightning-like flashes to highlight your presence in broad daylight
- SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path
- Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam
- USB rechargeable Li-ion battery
- Low battery indicator
- Light mode memory saves the mode you're in before the light is turned off
- Low profile, water-resistant design only weighs 30 grams
- Flexible mount conveniently attaches to most handlebars including aero bars
Patent pending.
*Features and specs are subject to change without notice.
Page 1 of 8
Next page